Tanım
Ürün Detayı
Dubleks 2205 lap joint flanges are loose backing flanges designed to be used together with lap joint stub ends. This construction allows flange rotation for easier bolt alignment and simplifies maintenance in piping systems that require frequent dismantling. With high strength, excellent resistance to chloride stress corrosion cracking and strong pitting resistance, 2205 duplex lap joint flanges are widely selected for offshore, tuzdan arındırma, kimyasal, kağıt hamuru ve kağıt, and process water service.
SASA FLANGE supplies standard and customized duplex 2205 lap joint flanges in accordance with ASME B16.5, ASME B16.47, EN 1092-1, DIN, JIS ve GB standartları. Her sipariş kimyasal analizlerle desteklenebilir, mekanik test, boyutsal muayene, PMI testi, EN 10204 3.1 certificate and full heat number traceability to ensure reliable performance in critical industrial applications.
- ✓Ürün adı: Dubleks 2205 Tur eklem flanşı
- ✓Malzeme Sınıfı: ASTM A182 F51 / UNS S32205 dubleks paslanmaz çelik
- ✓Ürün Tipi: Lap Joint Flange used with stub end
- ✓Ana Özellik: Yüksek mukavemet, excellent chloride corrosion resistance, easy alignment and maintenance
- ✓Uygulamalar: Petrol ve gaz, kimyasal işleme, deniz suyu sistemleri, tuzdan arındırma, elektrik ve su arıtma
Ürün Parametreleri
| Ürün adı | Dubleks 2205 Tur eklem flanşı |
| Malzeme Sınıfı | ASTM A182 F51 / UNS S32205; optional F60, F53, F55 |
| Malzeme Türü | Duplex stainless steel forged flange |
| Ürün Formu | Tur eklem flanşı / Loose Backing Flange for use with stub end |
| Boyut Aralığı | DN15 – DN1500 (1/2 inç – 60 inç) |
| Basınç Sınıfı | Sınıf 150 – 1500 / PN10 – PN100 |
| Sızdırmazlık Yüzü | Düz Yüz, Yükseltilmiş Yüz, special facing to suit lap joint stub end design |
| Yüzey İşlem | Turşu, pasivasyon, işlenmiş kaplama, işlenmiş yüzeylerde koruyucu yağ |
| Standart | ASME B16.5, ASME B16.47, EN 1092-1, DIN, JIS B2220, GB/T 9119 veya müşteri spesifikasyonu |
| Denetleme | Kimyasal Analiz, Mekanik Test, PMI Testi, Boyutsal Muayene, Görsel Muayene |
| Sertifika | EN 10204 3.1 Malzeme Sertifikası mevcut |
| İşleme Hizmeti | Kesme, CNC İşleme, Özel Delme, Özel Ebat İşleme |
Kimyasal Bileşim
Aşağıdaki kimyasal bileşim referans amaçlıdır ASTM A182 F51 / UNS S32205 duplex stainless steel used in duplex 2205 bindirme flanşları. Actual chemistry may vary slightly by heat and applicable standard. Final values are confirmed by the mill test certificate and verified through incoming material inspection and PMI testing before production.
| Öğe | C | Ve | Mn | P | S | CR | İçinde | Ay | Diğer |
|---|---|---|---|---|---|---|---|---|---|
| İçerik % | 0.030 maksimum | 1.00 maksimum | 2.00 maksimum | 0.030 maksimum | 0.020 maksimum | 22.0-23.0 | 4.5-6.5 | 3.0-3.5 | N 0.14-0.20 |
Mekanik Özellikler
Mechanical properties of duplex flange materials depend on grade, çözelti tavlama koşulu, section thickness and applicable specification. The values below are typical minimum requirements for forged duplex stainless steel flanges and are provided for technical reference. Final certified values are stated on the EN 10204 3.1 material certificate for each production heat.
| Seviye | Çekme Dayanımı | Akma Dayanımı | Uzama | Sertlik | Yoğunluk |
|---|---|---|---|---|---|
| ASTM A182 F51 / UNS S32205 | 620 MPa dk. | 450 MPa dk. | 25% dk. | 290YB maks | 7.80 g/cm3 |
| ASTM A182 F53 / UNS S32750 | 795 MPa dk. | 550 MPa dk. | 15% dk. | 310YB maks | 7.80 g/cm3 |
Ortak Boyut Tablosu
| Boyut Aralığı | Basınç Sınıfı | Sızdırmazlık Yüzü | Malzeme | Kullanılabilirlik |
|---|---|---|---|---|
| DN15 – DN50 | Sınıf 150 – 600 | FF / RF | ASTM A182 F51 | Stoklamak / Üretme |
| DN65 – DN300 | Sınıf 150 – 900 | FF / RF | ASTM A182 F51 | Stoklamak / Üretme |
| DN350 – DN600 | Sınıf 150 – 1500 | FF / RF | ASTM A182 F51 / F53 | Üretme |
| DN700 – DN1500 | Sınıf 150 – 600 | FF | ASTM A182 F51 | Sipariş Üzerine Üretildi |
Farklı Özellikler Karşılaştırması
| Tip | Tanım | Tipik Kullanım |
|---|---|---|
| ASME Bindirme Bağlantı Flanşı | Loose flange used with lap joint stub end, dimensioned to ASME B16.5 veya B16.47 | Proses boruları, bakım yoğun sistemler, kızak paketleri |
| TR Bindirme Bağlantı Flanşı | Plate or forged loose flange matched with EN stub end under EN 1092-1 boyutlar | European process plants, su ve kimya tesisatları |
| Dubleks 2205 LJ Flanş | Lap joint flange manufactured from ASTM A182 F51 duplex stainless steel for improved corrosion resistance | Deniz suyu, chloride-bearing media, offshore and desalination systems |
| Super Duplex LJ Flange | Loose flange in F53 or F55 for higher pitting resistance and strength than 2205 | High-chloride offshore, subsea and severe chemical environments |
Eşdeğer Standartlar ve Uluslararası İsimler
Dubleks 2205 lap joint flanges can be produced to major international flange standards according to project requirements. While the flange dimensional standard defines size and drilling, the material grade is generally specified separately as ASTM A182 F51 or equivalent duplex stainless steel. Eşdeğer adlar bölgeye göre değişebilir, drawing practice and end-user specification.
| Standart / Bölge | Standart Kod | Tipik Sınıf / Eş değer |
|---|---|---|
| Amerika | ASME B16.5 | ASTM A182 F51 / UNS S32205 |
| Avrupa | EN 1092-1 | 1.4462 dubleks paslanmaz çelik |
| Almanya | DIN 2527 / 2566 | malzeme 1.4462 |
| Japonya | JIS B2220 | SUS329J3L equivalent project-specified duplex |
| Çin | GB/T 9119 | 022Cr22Ni5Mo3N / S2205 equivalent |
Üretim Süreci Akışı
Manufacturing of duplex 2205 lap joint flanges requires controlled raw materials, proper heat treatment and precision machining to preserve duplex phase balance and corrosion resistance. SASA FLANGE applies strict process control from billet selection to final inspection.
- 1. Hammadde Seçimi
- 2. Dövme / Kesme
- 3. Isıl işlem
- 4. Kaba İşleme
- 5. Son İşleme
- 6. Sondaj
- 7. Yüzey İşlem
- 8. Denetleme
- 9. İşaretleme
- 10. Ambalaj
- 11. Teslimat
| Süreç Adımı | Tanım | Kalite Kontrol Noktası |
|---|---|---|
| Hammadde | Sertifikalı dövme kütüklerini veya plakalarını seçin | Malzeme sertifikası ve izlenebilirlik |
| Dövme | İstenilen şekli elde etmek için sıcak dövme | Dövme sıcaklığı ve indirgeme oranı |
| Isıl işlem | Solution annealing and rapid cooling for duplex structure | Sıcaklık ve bekletme süresi kontrolü |
| İşleme | Sızdırmazlık yüzü, cıvata delikleri, boyutlar | Boyutsal doğruluk ve yüzey kalitesi |
| Denetleme | Sevkiyat öncesi son muayene | Boyut, yüzey, PMI, işaretleme |
Ürün Denetimi
1. Kimyasal Bileşim Denetimi
Chemical composition inspection is performed to confirm that the duplex stainless steel used for the flange meets ASTM A182 F51 requirements. Key alloying elements such as chromium, nikel, molybdenum and nitrogen are verified against the specified range to ensure corrosion resistance, mechanical strength and compliance with the mill test certificate.
2. Mekanik Özellikler Testi
Mechanical testing is used to verify tensile strength, akma dayanımı, elongation and hardness of the forged flange material after heat treatment. These tests confirm the material has achieved the required duplex structure and strength level for pressure service. Test results are reviewed against applicable standards and included in the quality documentation package.
3. Boyutsal Muayene
Boyutsal inceleme dış çapı kapsar, iç çap, flanş kalınlığı, cıvata dairesi, bolt hole size and quantity, ve yüzleşme ayrıntıları. Bindirme bağlantı flanşları için, fit-up with the mating stub end is also checked to ensure free rotation and proper assembly. All dimensions are verified according to ASME, EN, DIN, JIS, GB veya müşteri çizimleri.
4. PMI Testi ve Hidrostatik Test
PMI testing is conducted using portable analyzers to confirm duplex 2205 material identity and prevent grade mix-up in critical projects. While flanges themselves are normally not hydrostatically tested as individual components, hydrostatic pressure testing can be arranged as part of assembled spool or project requirements. EN 10204 3.1 certificate and traceable inspection records are provided.
Ürün Ambalajı
- ✓Ahşap Sandık Ambalajı: Yüksek basınçlı ve büyük çaplı ürünler için uygundur
- ✓Shrink Wrap ile Palet Ambalajı: Toplu gönderiler ve standart boyutlar için uygundur
- ✓Pas önleyici Yağ Kaplama + Su geçirmez Kağıt: Okyanus taşımacılığı koruması için kullanılır
- ✓Bireysel Plastik Poşet + karton: Küçük bağlantı parçaları ve dişli ürünler için kullanılır
- ✓İşaretlemeyi Temizle: Seviye, boyut, basınç sınıfı, ısı numarası ve PO numarası
Uygulamalar
Dubleks 2205 lap joint flanges are widely used in corrosive and chloride-containing services where easy installation, flange rotation and frequent line disassembly are important. Their combination of high strength and strong corrosion resistance makes them suitable for demanding process piping across multiple industries.
| Endüstri | Tipik Uygulamalar | Bu Ürün Neden Kullanılıyor? |
|---|---|---|
| Petrol ve Gaz | Üretilen su hatları, açık deniz tesisatı boruları, firewater and chemical injection systems | High strength and good resistance to chloride stress corrosion cracking |
| Kimyasal İşleme | Acidic media transfer lines, process equipment connections, solvent and brine piping | Corrosion resistance and easy alignment with stub end assemblies |
| Güç Üretimi | FGD sistemleri, soğutma suyu devreleri, service water and condensate auxiliary lines | Reliable performance in wet and corrosive operating environments |
| Su Arıtma | Tuzdan arındırma kızakları, RO units, seawater intake and brine discharge systems | Excellent pitting resistance in chloride-rich water service |
| Denizcilik ve Açık Deniz | Deniz suyu soğutma, balast sistemleri, deck piping and offshore module fabrication | Durable corrosion performance and simplified maintenance in confined spaces |
Neden Seçmelisiniz? SASA FLANGE?
- ✓Global endüstriyel projelere yönelik Bindirme Bağlantı Flanşının profesyonel üreticisi
- ✓Özelleştirilmiş boyut, çizimlere göre basınç sınıfı ve malzeme kalitesi
- ✓Tam standart destek: ASME, EN, DIN, JIS, Büyük Britanya, GOST ve müşteri spesifikasyonları
- ✓Isı numarası kontrolü ile malzeme izlenebilirliği ve EN 10204 3.1 malzeme sertifikası
- ✓Kimyasal analiz, mekanik test, PMI testi, hidrostatik ve boyutsal muayene
- ✓Standart ürünler için stok durumu, kurşun zamanı 3-7 günler; özel üretim 15-30 günler
- ✓Deniz için ihracat kalitesinde ambalaj, hava ve kara taşımacılığı
- ✓15+ tedarik konusunda uzun yıllara dayanan deneyim 50+ dünya çapındaki ülkeler
SSS
Q: Dubleks nedir 2205 bindirme flanşı?
A: Dubleks 2205 lap joint flange is a loose backing flange used together with a lap joint stub end. Flanş borunun etrafında serbestçe döner, kurulum sırasında cıvata deliği hizalamasını kolaylaştırır. Made from duplex stainless steel ASTM A182 F51, it combines high mechanical strength with strong resistance to chloride corrosion in demanding industrial piping systems.
Q: What materials are available for duplex lap joint flanges?
A: The most common material is ASTM A182 F51 / UNS S32205, also known as duplex 2205. For more demanding corrosion environments, SASA FLANGE can also supply F60, super duplex F53 and F55 grades. Material selection depends on chloride content, çalışma sıcaklığı, pressure class and project specification or end-user approved vendor list.
Q: Hangi basınç sınıfı destekleniyor?
A: Dubleks 2205 lap joint flanges are commonly supplied in ASME Class 150, 300, 600, 900 Ve 1500, depending on size and standard requirements. Under European systems, PN10'dan PN100'e kadar üretilebilir. Gerçek mevcut basınç değeri flanş boyutlarına bağlıdır, malzeme kalitesi, service conditions and the corresponding stub end configuration.
Q: Olabilmek SASA FLANGE özel boyutlar sağlayın?
A: Evet. SASA FLANGE can manufacture custom duplex 2205 lap joint flanges according to drawings or project specifications. We support non-standard dimensions, özel sondaj, özel kaplama, matched stub end fit-up, special markings and upgraded materials such as super duplex. CNC machining and strict dimensional inspection ensure compatibility with the customer’s piping system.
Q: Hangi sertifika veriliyor?
A: SASA FLANGE sağlayabilir EN 10204 3.1 material certificate together with the mill test certificate, boyutsal inceleme raporu ve PMI kayıtları. Mechanical test results and chemical analysis are available according to the order requirement. For project packages, additional documentation such as packing list, heat number traceability and third-party inspection support can also be arranged.
Bize Ulaşın
If you are looking for duplex 2205 flanşlar veya ilgili özel flanş ürünleri, lütfen iletişime geçin SASA FLANGE İstediğiniz boyutta, basınç sınıfı, malzeme kalitesi, standart, yüzey işleme, miktar ve muayene gereksinimleri. Ekibimiz profesyonel teknik çözümler ve rekabetçi fiyat teklifi sunacaktır. 24 saat.
- 📧 E-posta: Sales@saflange.com
- 📱WhatsApp: +86 13764965049
- ☎️ Tel: +86 21 52236361
- 🌐 Web sitesi: www.sasaflange.com










