Flanşlar boru sistemlerinde kritik bileşenlerdir, bağlantı boruları, vanalar, and equipment while ensuring safe and efficient operation under pressure. While many flange types exist—such as weld neck, bağcıksız, kör, and socket weld—some are designed for very specific functions. One such specialized flange is the delik flanşı.

Orifice flanges are not only connectors but also measurement devices, enabling operators to monitor fluid flow in a pipeline. This makes them especially valuable in industries such as oil and gas, kimyasal işleme, su arıtma, ve enerji üretimi.

This article explains what an orifice flange is, how it works, its design features, uygulamalar, and why industries depend on it for accurate flow measurement.

---

Orifis Flanşı Nedir??

Bir delik flanşı is a type of flange assembly that incorporates an orifice plate for measuring the flow rate of liquids, gazlar, or steam in a pipeline. Unlike standard flanges, orifice flanges include radial, tapped holes drilled into the flange ring. These allow differential pressure to be measured across the orifice plate, enabling calculation of flow.

Basit anlamda, orifice flanges act as both a structural connection and an instrument for flow monitoring.

---

Components of an Orifice Flange Assembly

An orifice flange assembly typically consists of:

• Orifis Flanşları: A pair of flanges with pressure tap holes.

• Orifice Plate: A thin plate with a precise hole in the center.

• Bolts and Gaskets: To secure the assembly and ensure leak-proof operation.

• Jack Screws: Facilitate separation of flanges during plate replacement or inspection.

---

Working Principle of an Orifice Flange

1. Fluid flows through the pipeline and reaches the orifice plate.

2. The orifice plate introduces a restriction, creating a pressure drop across the plate.

3. Pressure taps in the flange measure the differential pressure before and after the orifice plate.

4. Flow rate is calculated based on this pressure difference using Bernoulli’s principle.

This method is widely used due to its simplicity, güvenilirlik, and accuracy.

---

Standartlar ve Spesifikasyonlar

Orifice flanges are manufactured according to international standards to ensure compatibility and accuracy:

• ASME B16.36: Standard for orifice flanges.

• ASME B16.5: Covers dimensions for flanges up to 24 inç.

• Basınç Değerleri: Typically available from Class 300 sınıfa 2500.

• Boyutlar: Commonly manufactured from ½ inch to 24 inches or larger, depending on pipeline design.

---

Materials Used in Orifice Flanges

Orifice flanges are produced in a variety of materials depending on operating conditions:

• Karbon Çelik (A105, A350 LF2): Economical choice for general service.

• Paslanmaz çelik (304, 316, 321, 347): Üstün korozyon direnci.

• Alaşımlı Çelik (F11, F22): High strength for elevated temperature applications.

• Dubleks Paslanmaz Çelik: Excellent resistance to stress corrosion cracking in chloride-rich environments.

• Nikel Alaşımları (İnkonel, Hastelloy, Monel): Exceptional resistance to aggressive chemicals.

---

Advantages of Orifice Flanges

• Accurate Flow Measurement: Simple and effective method for monitoring flow rates.

• Dual Functionality: Acts as both a flange and a measuring device.

• Standardized Design: Complies with ASME standards for easy integration.

• Cost-Effective: More affordable than advanced flow meters while providing reliable results.

• Çok yönlülük: Suitable for liquids, gazlar, ve buhar.

---

Applications of Orifice Flanges

Orifice flanges are widely used in industries where flow monitoring is critical:

Petrol ve Gaz

Used to measure crude oil, doğal gaz, and refined product flow in pipelines and processing plants.

Kimya ve Petrokimya

Enables accurate flow measurement of corrosive chemicals in refineries and chemical plants.

Güç Üretimi

Monitors steam flow in boilers, turbines, and cooling water circuits.

Water Treatment and Distribution

Measures water flow in treatment facilities, pumping stations, and distribution networks.

Denizcilik ve Açık Deniz

Used in shipboard systems and offshore platforms to track fuel and cooling flows.

---

Types of Orifice Plates Used in Orifice Flanges

Different orifice plate designs can be fitted into the flange assembly:

• Concentric Orifice Plate: En yaygın, with a central bore for general flow measurement.

• Eccentric Orifice Plate: Bore offset from the center, used for measuring dirty or slurry fluids.

• Segmental Orifice Plate: Semi-circular bore, suitable for gas or liquid with suspended solids.

• Quadrant Edge Orifice Plate: Rounded bore edge, ideal for viscous fluids.

---

Kurulum ve Bakım

• Kurulum: Orifice flanges are installed in pairs, with the orifice plate clamped between them. Pressure taps are aligned for differential pressure measurement.

• Bakım: Plates can be removed and replaced using jack screws without dismantling the entire system. Regular inspection ensures accuracy.

---

Difference Between Orifice Flanges and Standard Flanges

• Standart Flanşlar: Serve only as mechanical connectors.

• Orifis Flanşları: Connect pipes and measure flow simultaneously.

This unique functionality makes orifice flanges indispensable in flow-critical systems.

---

Case Study Example

A power plant needed to monitor steam flow through its high-pressure boilers. Traditional flow meters were too costly. By installing orifice flanges with concentric plates, the plant achieved reliable flow measurement, simplified maintenance, and reduced equipment costs, all while meeting ASME standards.

---

Future Trends in Orifice Flanges

• Integration with Digital Monitoring: Coupled with smart sensors for real-time data collection.

• Advanced Materials: Increased use of duplex and nickel alloys for extreme environments.

• Customized Designs: Tailored flange and plate assemblies for specific flow and pressure conditions.

---

Why Choose sasaflange for Orifice Flanges

When sourcing critical flange components, reliability and precision are essential. Sasaflance supplies high-quality orifice flanges manufactured to ASME B16.36 and B16.5 standards. With options in carbon steel, paslanmaz çelik, alaşımlı çelik, ve nikel alaşımları, Sasaflance ensures accurate flow measurement and long-lasting performance across industries.

---

Çözüm

An orifice flange is a specialized flange assembly used to measure flow rates in pipelines by introducing an orifice plate and capturing differential pressure readings. It combines the strength of a flange connection with the functionality of a flow measurement device, making it highly valuable in industries such as oil and gas, kimyasal işleme, enerji üretimi, ve su arıtma.

With standardized design, versatility, ve maliyet etkinliği, orifice flanges remain one of the most widely used solutions for monitoring fluid flow. By selecting the right materials and working with trusted suppliers, industries can ensure reliable performance and long-term efficiency in critical operations.