고압 배관 시스템은 석유 및 가스와 같은 산업에서 중요한 인프라입니다., 석유화학, 발전, 항공우주. 이 시스템은 고온과 관련된 극한 조건에서 작동합니다., 강렬한 압력, 부식성 매체. 결과적으로, each component—especially the flanged connections—must offer superior mechanical strength and leak-tight integrity. One innovative solution that enhances both safety and performance in these applications is the use of dual-flange structures.

에이 dual-flange structure involves the integration of two flanges—often arranged in tandem—to reinforce the connection and distribute mechanical loads more evenly. This setup is increasingly used in high-pressure pipelines, 압력 용기, and subsea installations. 이 기사에서는, we explore the benefits, design principles, 재료, and application scenarios of dual-flange structures in high-pressure systems.

---

1. What Is a Dual-Flange Structure?

에이 dual-flange structure refers to the configuration where two flanges are employed together at a single joint or in close proximity to enhance:

• Pressure resistance

• Structural stability

• Vibration damping

• Sealing reliability

This can be achieved in several ways:

• Two standard flanges bolted together for a stronger joint

• 에이 백킹 플랜지 supporting the primary flange

• 에이 redundant flange system with parallel sealing for added safety

These designs are commonly found in high-pressure vessels, critical gas lines, offshore oil pipelines, 그리고 cryogenic storage systems.

---

2. Why Use Dual-Flange Structures?

Single-flange joints may be sufficient in moderate-pressure systems, but in 고압 또는 dynamic environments, additional reinforcement is necessary. Dual-flange setups provide:

• Redundancy in case one flange experiences gasket failure

• Improved alignment and support for large-diameter or long-span pipelines

• Enhanced stress distribution around the joint

• Sealing reinforcement through dual-gasket configurations

• Reduced risk of flange rotation or bolt failure

~에 SASAFLANGE, we specialize in dual-flange solutions designed to withstand extreme mechanical and environmental challenges.

---

3. Types of Dual-Flange Configurations

에이) Tandem Flanges

Two flanges installed back-to-back with a shared bolt circle. Often used in critical applications where a double-sealing system is required.

비) Reinforcing Flange + Primary Flange

A secondary flange is added behind the main flange to act as a structural support, preventing distortion under bending or thermal loads.

기음) Double Isolation Flange Systems

Used in hazardous or toxic media handling, this setup includes two sealing surfaces separated by a bleed port to ensure zero leakage.

디) Dual-Flange Adapter Systems

Used to connect pipes of different diameters or standards (예를 들어, ANSI to DIN), 헌금 structural integrity and transition flexibility.

---

4. Material Selection for Dual-Flange Systems

Material choice is critical in dual-flange assemblies due to the increased mechanical load and environmental exposure.

공통재료:

• 탄소강 (ASTM A105, A350 LF2)

• 스테인레스 스틸 (304, 316, 321)

• 합금강 (F11, F22)

• 듀플렉스 스테인레스 스틸 (2205, 2507)

• 니켈 합금 (인코넬, 하스텔로이, 모넬)

SASAFLANGE offers dual-flange assemblies in all standard and custom materials, fully traceable and compliant with ASME, EN, and API standards.

---

5. Design Considerations for Dual-Flange Assemblies

When engineering a dual-flange system, several factors must be considered:

• 압력 등급: Flanges should be rated for Class 600 이상

• Bolt load: Must be evenly distributed across both flanges

• Gasket compatibility: Dual-gasket setups must match the service media

• Flange face types: Can be Raised Face (RF), 링형 조인트 (RTJ), or Flat Face (FF)

• Installation clearance: Additional space required for bolts and inspection

• 열팽창: Must accommodate dimensional changes during operation

우리의 SASAFLANGE engineering team works with clients to customize each dual-flange solution to specific project conditions.

---

6. Applications of Dual-Flange Structures

Dual-flange systems are used where safety, 성능, and reliability cannot be compromised. Common applications include:

에이) High-Pressure Natural Gas Pipelines

• Long-distance gas transport under high internal pressure

• Dual flanges reduce flange movement due to pressure pulsation

비) Subsea and Offshore Installations

• Withstands underwater pressure and corrosion

• Enhances joint integrity in deep-sea environments

기음) High-Temperature Steam Lines

• Used in thermal power plants and chemical reactors

• Dual flanges mitigate stress caused by thermal expansion and vibration

디) Hazardous Chemical Transport

• Dual-seal design prevents leakage of corrosive or toxic media

• Enables safe inspection and maintenance without full depressurization

이자형) Cryogenic Systems

• LNG pipelines and liquid hydrogen storage

• Maintains seal integrity under extreme temperature fluctuations

---

7. Sealing Mechanism and Gasket Options

Dual-flange systems may use one or two gaskets, depending on configuration:

• Double gasket: Used in isolation applications with a monitoring port between gaskets

• Single gasket with backup: Secondary flange provides structural support if the primary seal fails

Gasket types include:

• 나선형 상처 개스킷

• RTJ (링형 조인트) 개스킷

• Kammprofile 개스킷

• Metal-jacketed gaskets

Gasket material must match both the fluid and the temperature/pressure profile of the system.

---

8. Standards and Codes

While dual-flange configurations are not always specified in public codes, they are often designed to comply with:

• ASME B16.5 / B16.47

• API 6A / API 6D

• MSS SP-44

• EN 1092-1

• ISO 7005

모두 SASAFLANGE dual-flange systems can be delivered with:

• EN 10204 3.1/3.2 재료 인증서

• Non-destructive testing (NDT) reports

• Hydrostatic and pneumatic test results

• Dimensional inspection records

---

9. Advantages of Dual-Flange Structures