고압 및 고온 배관 시스템, 누출을 방지하려면 플랜지 사이의 안정적인 밀봉을 보장하는 것이 중요합니다., 안전 유지, 성능 최적화. 링형 조인트 (RTJ) 개스킷 are a preferred choice in industries such as oil and gas, 석유화학, and power generation for their ability to maintain tight seals under extreme conditions.

This complete guide will explore what RTJ gaskets are, the different types available, their key benefits, and the best practices for use in industrial applications.

---

What Are RTJ Gaskets?

RTJ gaskets are precision-engineered metal sealing rings designed to fit into specifically machined grooves on RTJ flanges. When the flange bolts are tightened, the gasket is compressed between the flanges, creating a metal-to-metal seal. This makes them ideal for critical applications where leakage is unacceptable.

---

How RTJ Gaskets Work

The gasket’s metal surface is softer than the flange material, allowing it to deform slightly under pressure and fill any imperfections in the flange groove. This results in a high-integrity, leak-proof seal even in extreme environments.

---

Types of RTJ Gaskets

1. R-Type

• Oval Cross Section: Fits older groove designs; requires accurate alignment.

• Octagonal Cross Section: More common in modern applications; provides a better seal due to larger sealing surface.

2. RX-Type

• Pressure-energized design that improves sealing as system pressure increases.

• Interchangeable with R-type gaskets in the same groove dimensions.

3. BX-Type

• High-pressure variant designed for pressures up to 20,000 psi.

• Not interchangeable with R or RX types.

---

Materials Used for RTJ Gaskets

Material selection depends on the flange material and the service environment.

Common Materials:

• Soft Iron

• Low Carbon Steel

• 스테인레스 스틸 (304, 316, 347)

• 합금강 (F5, F11, F22)

• 니켈 합금 (인코넬, 모넬, 하스텔로이)

• 듀플렉스 및 슈퍼듀플렉스 스테인리스 스틸

---

맨 위 5 RTJ 개스킷의 장점

1. Exceptional Sealing Performance

RTJ gaskets provide a metal-to-metal seal that is highly resistant to leakage, even in high-pressure, 고온, 부식성 환경. The precise fit in the flange groove ensures sealing integrity over long periods.

2. High Pressure and Temperature Resistance

These gaskets are designed to withstand pressures up to 20,000 psi and temperatures exceeding 1000°F (538℃), making them ideal for severe service conditions.

3. Long Service Life

Due to their robust construction and resistance to creep, RTJ gaskets can last for years without needing replacement, 가동 중지 시간 및 유지 관리 비용 절감.

4. Compatibility with Harsh Media

RTJ gaskets can handle a wide range of media, including hydrocarbons, 약, 증기, and corrosive fluids, making them suitable for diverse industries.

5. Standards Compliance

Manufactured to API 6A, ASME B16.20, and other international standards, RTJ gaskets are compatible with global piping systems, ensuring easy sourcing and replacement.

---

Industrial Applications of RTJ Gaskets

석유 및 가스 산업

• 수원 어셈블리

• Subsea pipelines

• Offshore platforms

Petrochemical Plants

• Reactor vessels

• 열교환기

• 프로세스 배관

발전

• 고압 증기 라인

• Boiler systems

• Turbine casings

Marine Applications

• High-pressure seawater systems

• Pump connections

---

Installation Best Practices

1. Flange Groove Inspection: Ensure the groove is clean, free of debris, and within dimensional tolerances.

2. Correct Gasket Selection: Match type, 크기, and material to the application and flange specification.

3. Proper Bolt Tightening: Use a calibrated torque wrench and tighten in a star pattern to achieve even compression.

4. Avoid Reuse: RTJ gaskets are generally single-use due to deformation during installation.

5. Storage and Handling: Store in a clean, dry environment to prevent corrosion or damage before installation.

---

RTJ Gaskets vs. Other Gasket Types