산업용 배관 시스템, stainless steel flanges are widely chosen for their excellent corrosion resistance, 내구성, and ability to perform in demanding environments. 하지만, the performance of a stainless steel flange does not depend solely on the flange itself—its connection method, especially the type of bolt connection, plays a decisive role in ensuring leak-free operation, 구조적 완전성, 장기적인 신뢰성.

Selecting the correct bolt connection for stainless steel flanges requires consideration of pressure class, 온도 범위, 개스킷 유형, 및 환경 조건. This article explains the types of bolt connections used with stainless steel flanges, the technical considerations, and best practices for installation.

---

Why Bolt Connection Matters for Stainless Steel Flanges

The flange joint in a piping system must create a secure, uniform seal across the gasket surface. The bolt connection provides the clamping force necessary to compress the gasket and hold the flanges together under internal pressure. Improper bolt selection or incorrect tightening can lead to leaks, joint failure, or premature wear.

~에 SASAFLANGE, flange-bolt compatibility is carefully evaluated for every project to ensure maximum joint performance, 안전, 국제 표준 준수.

---

Common Bolt Connection Types for Stainless Steel Flanges

1. Stud Bolts with Nuts

• 설명: Fully threaded bolts with nuts on both ends, passing through the flange holes.

• 장점:

  • Allows even distribution of clamping force.

  • Easy to install and remove for maintenance.

  • Suitable for high-pressure and high-temperature service.

• 응용: ASME B16.5 raised face flanges, RTJ (링형 조인트) flanges in oil, 가스, 석유화학 산업.

---

2. Hex Head Bolts with Nuts

• 설명: Partially threaded bolts with a hexagonal head on one end and a nut on the other.

• 장점:

  • Widely available and easy to handle.

  • Suitable for low-to-medium pressure stainless steel flange connections.

• 응용: 수처리 시스템, HVAC pipelines, food processing plants.

---

3. Socket Head Cap Screws

• 설명: Bolts with a cylindrical head and hexagonal drive hole, used with tapped flange holes.

• 장점:

  • Cleaner appearance, no protruding nuts.

  • Useful in limited space applications.

• 응용: Compact stainless steel flange assemblies, 해양 시스템.

---

4. Tension Control Bolts

• 설명: Specialized bolts with a break-off tip that shears when the correct torque is reached.

• 장점:

  • Ensures consistent clamping force without manual torque measurement.

  • Reduces risk of over- or under-tightening.

• 응용: Stainless steel flanges in structural and offshore applications.

---

Material Selection for Bolts in Stainless Steel Flange Connections

The choice of bolt material is critical to avoid galvanic corrosion and maintain strength:

• Stainless Steel Bolts (304, 316)

  • Best for corrosion resistance in marine, 화학적인, and food-grade applications.

  • Suitable for low-to-medium pressure service.

• Alloy Steel Bolts (ASTM A193 B7)

  • High tensile strength for high-pressure steam, 기름, and gas systems.

  • Must be paired with insulating washers to prevent galvanic corrosion when used with stainless steel flanges.

• Duplex Stainless Steel Bolts

  • Excellent for chloride-rich environments like seawater systems.

  • Combines high strength and corrosion resistance.

---

Bolt Pattern and Size Considerations

• 볼트 원 직경 (BCD) – The diameter of the circle that passes through the bolt holes; must match the flange standard.

• Number of Bolts – Determined by flange size and pressure class (예를 들어, 수업 150, 수업 300).

• Bolt Diameter and Length – Specified in ASME B16.5 또는 EN 1092-1 표준.

---

Torque and Tightening Requirements

Correct bolt tightening is essential for stainless steel flanges to maintain gasket compression and prevent leakage:

• Cross-Pattern Tightening – Bolts should be tightened in a star or cross pattern to distribute load evenly.

• Multiple Passes – Apply torque in gradual increments (예를 들어, 30%, 60%, 100% of final torque).

• 매끄럽게 하기 – Use approved lubricants on threads and nut bearing surfaces to reduce friction and ensure accurate preload.

• Torque Values – Must follow manufacturer or industry guidelines, adjusted for gasket type and bolt material.

---

Best Practices for Bolt Connections in Stainless Steel Flanges

1. Match Materials – Avoid galvanic corrosion by using bolts of the same or compatible alloy.

2. Check Standards – Follow ASME, EN, or DIN specifications for bolt size and pattern.

3. Use Quality Gaskets – Proper gasket choice works hand-in-hand with correct bolt connection.

4. Regular Inspection – Periodic checks for bolt loosening, 부식, and wear.

5. Environmental Considerations – For outdoor or marine exposure, consider anti-seize coatings or protective caps.

---

Typical Applications of Stainless Steel Flange Bolt Connections

• Marine and Offshore Pipelines – 316 stainless steel bolts for seawater resistance.

• 화학 처리 공장 – PTFE-coated bolts to resist chemical attack.

• 식품 및 음료 산업 – Hygienic flange connections using stainless steel bolts.

• 석유 및 가스 – High-strength alloy bolts for high-pressure stainless steel flanges.

---

결론

The type of bolt connection used for stainless steel flanges is a key factor in achieving safe, 누출이 없는, and long-lasting performance. Stud bolts with nuts remain the most common choice for industrial applications, but hex head bolts, socket head screws, and specialized tension control bolts also have their roles in specific environments.

With proper material selection, correct torque application, and adherence to international standards, stainless steel flange connections can deliver years of reliable service. Backed by expertise in flange manufacturing and connection technology, SASAFLANGE provides complete solutions that ensure the perfect match between flanges and bolt connections for diverse industries worldwide.