ASTM B366 Inconel 625 Long-Radius Elbow RFQ Checklist

Quick Answer

A complete RFQ for an ASTM B366 Inconel 625 90-degree long-radius elbow should state UNS N06625, the applicable ASTM B366 WP grade and class, ASME B16.9 geometry, nominal size, wall schedule, end preparation, construction route, inspection scope and required documents. “Inconel 625 LR elbow” alone does not define a purchase-ready fitting.

View ASTM B366 Inconel 625 LR Elbows

1. Separate the Material Standard From the Dimensional Standard

ASTM B366/B366M covers factory-made wrought nickel and nickel-alloy fittings for pressure piping. Its scope includes butt-welding elbows and distinguishes WP fitting classes according to construction and the applicable nondestructive examination route. ASME B16.9 controls the dimensional side of factory-made wrought butt-welding fittings, including dimensions, tolerances, ratings, testing and marking.

For an RFQ, use both references for different purposes: ASTM B366 identifies material and construction requirements, while ASME B16.9 identifies the fitting geometry and dimensional framework. The project specification and governing piping code may add requirements; the order should name the adopted editions instead of assuming them.

2. Identify the Alloy and Product Form Clearly

Use the UNS designation N06625 together with the commercial alloy name where helpful. Special Metals describes alloy 625 as a nickel-chromium-molybdenum alloy with niobium and notes its resistance to a broad range of severe corrosive environments. This material description does not replace the fitting standard, heat treatment, dimensional standard or project acceptance criteria.

Avoid copying a pipe, plate or flange specification into a fitting order. The RFQ should identify the fitting specification and the grade/class that applies to the intended elbow construction.

3. Confirm the ASTM B366 WP Class

RFQ item Why it matters What to state
WP grade and class Construction and examination routes are not interchangeable. Exact ASTM B366 grade/class required by the design.
Seamless or welded construction The route affects class designation and inspection evidence. Permitted route or approved alternatives.
Supplementary examination ASTM B366 provides optional supplementary requirements when greater examination is needed. Only project-required additions, with acceptance criteria.

Do not select a class from a price list alone. The purchaser, piping engineer and inspection plan should agree on the required construction and NDE scope before quotation.

4. Define the Elbow Geometry

State a 90-degree long-radius butt-welding elbow and name ASME B16.9. Include nominal pipe size and wall schedule or the required matching wall thickness. Nominal size is not the measured outside diameter, and the schedule must match the connected piping design.

Also specify whether the ends are plain or bevelled, the required bevel standard or drawing, and any project-specific transition or matching-bore requirement. If the design requires dimensions outside the selected standard, provide an approved drawing rather than describing the item as a standard elbow.

5. Put Inspection and Documents in the RFQ

Request only the inspection and documentation that the project actually requires. Typical order fields include material test certification, heat or lot traceability, dimensional inspection, visual inspection, marking review and the applicable NDE reports for the selected ASTM B366 class. If PMI, additional surface examination or purchaser witnessing is required, state the method, extent and acceptance basis.

ASTM B366 notes that hydrostatic testing of wrought fittings is not required by that specification. A project that requires pressure testing must therefore define the test requirement separately instead of assuming it is included.

6. Twelve Fields for a Quote-Ready RFQ

# Required field RFQ entry
1 Material UNS N06625 / alloy 625
2 Fitting specification ASTM B366/B366M, adopted edition
3 WP grade/class Exact project requirement
4 Fitting type 90° long-radius butt-welding elbow
5 Dimensional standard ASME B16.9, adopted edition
6 Size NPS or DN
7 Wall Schedule or specified wall thickness
8 End preparation Bevel standard or approved drawing
9 Construction Permitted seamless/welded route
10 Inspection/NDE Method, extent and acceptance basis
11 Documents MTC, reports, traceability and marking
12 Quantity and packaging Item count, marking and packing instructions

Common Purchasing Errors

  • Using “Inconel 625” without UNS N06625 and ASTM B366.
  • Omitting the WP class or construction route.
  • Confusing nominal size with outside diameter.
  • Leaving the wall schedule or matching thickness undefined.
  • Requesting “full inspection” without method, extent or acceptance criteria.
  • Assuming a hydrostatic test is automatically included by ASTM B366.

Send a Complete Elbow RFQ

Send your material grade, WP class, size, schedule, dimensional edition, end preparation, inspection scope and document list for a technical review and quotation.

Request a Quote

References

HomeProducts
Search