특징	스테인레스 스틸 플랜지	Carbon Steel Flange
Main Alloy Elements	철, 크롬 (≥10.5%), 니켈	철, 탄소 (0.2–0.6%)
부식 저항	훌륭한	낮은 (requires coating or lining)
Appearance	Silvery, bright, non-rusting	Dull gray, prone to rust
Magnetic Property	Usually non-magnetic (austenitic)	Magnetic
비용	더 높은	낮추다
Typical Grades	SS304, SS316, SS321	ASTM A105, A350 LF2, Q235

1. 육안검사

스테인레스 스틸 플랜지 generally have a bright silver finish and resist oxidation. Even after extended exposure to air and moisture, they maintain a clean, shiny surface.

Carbon steel flanges, 반면에, often appear dull gray or matte black. Without protective coatings like paint, 아연 도금, 아니면 기름, carbon steel flanges will rust over time.

Visual differences:

• 스테인레스 스틸: Polished or satin finish, clean look, no surface corrosion

• 탄소강: Dull, may have red/brown rust spots or black oxide coating

SASAFLANGE supplies flanges with mill finish or custom surface treatment to ensure easy identification and superior corrosion protection.

---

2. Magnet Test

This is a quick and easy field test to identify the general category of steel:

• 탄소강 is always 자기

• 스테인레스 스틸 varies:

  • Austenitic grades (예를 들어, SS304, SS316): Non-magnetic or slightly magnetic

  • Ferritic and martensitic grades: Magnetic

Place a magnet on the flange. If it sticks strongly, it’s likely carbon steel or ferritic stainless. If it barely reacts or does not stick, it is likely austenitic stainless steel.

메모: Cold-working or machining austenitic stainless steel can make it slightly magnetic, so this test is not 100% conclusive.

---

3. Spark Test

The spark test is commonly used in metal workshops:

• 탄소강 produces 긴, branching orange sparks when touched with a grinder

• 스테인레스 스틸 produces shorter, fewer sparks that are red or dull orange, often with less branching

This method requires experience and should be done with care. Always follow safety precautions when using grinders or spark tools.

---

4. Weight Comparison

Stainless steel is slightly denser than carbon steel:

• Density of carbon steel: ~7.85 g/cm³

• Density of stainless steel (304/316): ~8.0 g/cm³

Although the difference is small, stainless steel flanges may feel slightly heavier than carbon steel flanges of the same size and design.

---

5. Chemical Testing with Spot Kits

For more accuracy, chemical spot test kits are available to detect the presence of 니켈, 크롬, or molybdenum in stainless steel.

예를 들어:

• Nitric acid: Stainless steel resists attack, while carbon steel shows rust or bubbling

• Copper sulfate: Reacts with carbon steel (copper plating visible) but not with stainless steel

These are semi-quantitative methods and give a reliable field indication of the material composition.

---

6. Material Markings and Stamping

Reputable manufacturers like SASAFLANGE mark each flange with:

• 재료 등급 (예를 들어, SS316, A105)

• 압력 등급 (예를 들어, 150#, 300#)

• Size and schedule

• 기준 (예를 들어, ASME B16.5)

• 히트 수 for traceability

Always check the stamping on the flange rim or hub. If a flange lacks clear markings, it should be tested before installation.

---

7. 긍정적인 물질 식별 (PMI)

The most accurate way to distinguish flange material is PMI 테스트 using handheld analyzers like XRF (X-ray fluorescence) 또는 라이브러리 (laser-induced breakdown spectroscopy).

These devices provide:

• Elemental composition (예를 들어, Cr, ~ 안에, 철, 모)

• Grade matching (예를 들어, confirms 316L vs 304)

• Instant results in the field or warehouse

PMI is often required for critical systems in 기름 & 가스, 압력 용기, and food processing equipment.

SASAFLANGE offers full PMI testing and certification for stainless steel and carbon steel flange deliveries upon request.

---

8. Corrosion Behavior

Expose a small, cleaned section of the flange to salt water spray or a humid environment for 24–48 hours.

• 탄소강: Will show visible rust or reddish discoloration

• 스테인레스 스틸: Remains clean or may develop a light surface film, but no red rust

This simple exposure test helps confirm the corrosion resistance typical of stainless steel.

---

Applications Based on Flange Material