산업용 배관 시스템, large diameter flanges are critical components that enable the connection of oversized pipes, 밸브, 선박, 및 장비. 이 플랜지는 발전소에서 일반적으로 사용됩니다., 화학 처리 시설, 정유소, water treatment plants, 해양 플랫폼, and large-scale infrastructure. Due to their size, weight, and operating conditions, 그만큼 assembly of large diameter flanges involves more complexity and higher safety requirements than standard flange connections.

This article explains the principle requirements for large diameter flange assembly, including preparation, 조정, 토크 제어, 밀봉 무결성, safety precautions, 및 검사. Whether you are a piping contractor, plant operator, or maintenance technician, understanding these requirements is essential for achieving a secure, 누출이 없는, and durable flange connection.

As a trusted flange manufacturer and supplier, SASAFLANGE offers high-quality large diameter flanges with full compliance to ASME, EN, and custom specifications, as well as technical support for field assembly and installation.

---

What Are Large Diameter Flanges?

Large diameter flanges typically refer to flanges with nominal diameters of 24 inches and above, extending up to 2000 mm (또는 80 신장) or more. These flanges are found in:

• Large pipelines for water, 기름, 가스, or chemicals

• Pressure vessels and heat exchangers

• Storage tanks and silos

• Offshore and subsea installations

• Cooling towers and desalination systems

They are usually manufactured as 용접 목, 눈이 먼, 랩 조인트, 또는 맞춤형 플랜지 탄소강에, 스테인레스 스틸, 또는 합금강, depending on the operating conditions.

---

Principle Requirements for Large Diameter Flange Assembly

Proper assembly of large flanges is vital to ensure 구조적 완전성, pressure containment, 장기적인 신뢰성. Below are the key principles to follow:

---

1. Preparation of Components

Before starting the flange assembly process, all parts must be thoroughly inspected and prepared.

표면 청소

• Clean the gasket seating faces, 볼트 구멍, and flange surfaces using solvents or degreasing agents

• Remove 먼지, 기름, 녹, and old gasket residues

육안검사

• Check flanges for 평탄, 표면 마무리, 그리고 machining defects

• Inspect for 균열, burrs, 찌그러짐, or out-of-round conditions

Bolt and Gasket Verification

• Confirm that 볼트, 견과류, 그리고 와셔 meet the torque and material requirements

• Use the correct gasket type and size (spiral wound, RTJ, soft gasket, 등.)

SASAFLANGE provides large flanges with machined faces, bevels, and standard markings for easy identification and pre-assembly checks.

---

2. Proper Alignment

Misalignment can cause bolt bending, 개스킷 고장, flange deformation, or even leakage. Accurate alignment is critical.

Use of Lifting Equipment

• Large flanges require cranes, slings, spreader bars, or hydraulic manipulators for safe handling

• Never force flanges into place using bolts

Pipe Support

• 사용 temporary pipe supports or jacks to maintain correct elevation and axial alignment

• Avoid sagging or torsional stress on the flange joint

Radial and Angular Tolerances

• Ensure radial runout and face parallelism fall within acceptable limits as per ASME B31.3 또는 EN 1591-1

---

3. Gasket Installation

The gasket is a key sealing component and must be installed carefully:

• Check gasket for damage or warping

• Ensure centered placement between flanges without protrusion

• Do not reuse gaskets or apply lubricants unless specified

• Keep gasket dry and clean during handling

Large diameter gaskets often require multiple installers or vacuum lifting tools for proper positioning.

---

4. Bolt Tightening Sequence and Torque Control

Due to the number of bolts and the size of the flange, even distribution of load is crucial to prevent leakage and maintain sealing.

Cross-Bolting Pattern

• Use the star or criss-cross pattern to ensure uniform gasket compression

• Divide bolts into quadrants and tighten in stages

Multiple Passes

• First pass: 30% of final torque

• Second pass: 70%

• Final pass: 100% of specified torque

• Optional final rotational pass to ensure bolt tension equalization

Torque Tools

• 사용 calibrated torque wrenches, hydraulic bolt tensioners, or pneumatic tools

• Record all torque values during assembly

SASAFLANGE recommends following ASME PCC-1 guidelines for bolting large diameter flanges to ensure consistent preload and joint integrity.

---

5. Flange Face Protection and Handling

Large flanges are heavy and vulnerable to damage during transit and handling.

Protective Measures:

• 사용 face protectors during storage and shipping

• Avoid stacking flanges directly on flange faces

• Always lift using designated lifting points or holes

Improper handling may damage sealing surfaces, requiring costly rework or flange replacement.

---

6. Thermal and Pressure Considerations

In applications involving temperature fluctuation or pressure cycles, consider the effect on bolt relaxation and gasket stress.

• 열팽창 may loosen bolts—retighten after initial operation

• Pressure surge can strain the joint—select gaskets with proper recovery and compressibility

• Differential expansion of flange and pipe materials (예를 들어, stainless steel vs carbon steel) must be evaluated

SASAFLANGE engineers provide technical support for flange selection and installation under thermal and mechanical loading conditions.

---

7. Hydrostatic and Pneumatic Testing

Once assembled, the flange connection must be tested for leaks and integrity.

수압 테스트:

• Fill the system with water

• Apply pressure 1.5x the design pressure

• Hold and inspect for pressure drop or visual leaks

Pneumatic Testing:

• Use air or nitrogen at low pressure

• Use bubble solution or leak detection spray

• Exercise extreme caution due to risk of explosive energy release

Document all test results, including pressure levels, duration, and observations.

---

8. Documentation and Inspection

Thorough documentation ensures traceability and compliance.

• Torque logs, flange alignment records, and gasket type must be recorded

• Perform visual and dimensional inspections using feeler gauges, calipers, and dial indicators

• Verify material certifications (EN 10204 3.1/3.2) and conformity to drawing requirements

SASAFLANGE provides MTCs, 차원 보고서, and customized marking on all large flanges to simplify documentation.

---

Safety Considerations During Assembly

• Always wear PPE: gloves, safety shoes, hard hats, eye protection

• 사용 lockout/tagout procedures when working on pressurized lines

• Secure tools, especially when working at height or with suspended flanges

• Never stand under a lifted flange or pipe

• Train personnel in safe rigging, lifting, and torqueing procedures

---

Why Choose sasaflange for Large Diameter Flanges?

SASAFLANGE offers a complete range of large diameter flanges from DN600 to DN2000 and beyond, with key advantages:

• 정밀 단조 및 CNC 가공

• Custom manufacturing per drawing and non-standard specs

• Wide material options: 탄소강, 스테인레스 스틸, 듀플렉스, 니켈 합금

• Quality assurance: 유타, RT, MT, PMI, 수압 테스트

• Fast lead times and global delivery

• Technical guidance for safe assembly and maintenance

Our large flanges are used in critical energy and infrastructure projects across the globe, supporting both EPC contractors and end users.

---

결론

그만큼 assembly of large diameter flanges is a complex task that demands careful planning, precise execution, and strict adherence to standards. 에서 component preparation and alignment to bolting sequences and leak testing, every step must be performed with accuracy to ensure a reliable, leak-free connection.

Whether you’re working on a water pipeline, refinery system, or industrial plant expansion, partnering with an experienced flange supplier like SASAFLANGE ensures that your large diameter flanges meet the highest standards of 안전, 내구성, 성능.