고온 시스템은 배관 구성 요소를 한계까지 밀어붙입니다.. 발전소에서든, 석유화학 정유소, 또는 산업용 용광로, equipment exposed to extreme heat must be engineered with precision — and that includes 플랜지. Selecting the right flange for high-temperature applications is not just about compatibility; it’s about safety, 신뢰할 수 있음, 그리고 장기적인 성과.

이 기사에서는, we’ll explore the key considerations for flange selection in high-heat environments, recommend the best materials and flange types, and explain why thermal stability is critical for pressure integrity. If you’re designing or maintaining high-temperature systems, this guide is for you.

As a global flange manufacturer, SASA FLANGE provides heat-resistant flange solutions trusted in extreme environments across the world.

---

Why High Temperature Demands Special Flange Considerations

At elevated temperatures — often above 400°C (752°F) — materials begin to behave differently:

• Tensile strength drops

• Thermal expansion increases

• Gasket sealing becomes less reliable

• Creep and deformation can occur over time

These effects can cause joint failure, 누출, or even dangerous pressure releases. That’s why it’s essential to choose flanges specifically rated for high-temperature use.

---

Key Properties Required in High-Temperature Flanges

🔥 Thermal Stability

Flanges must maintain their mechanical integrity at sustained high temperatures.

🔩 Creep Resistance

시간이 지남에 따라, materials subjected to heat and pressure can slowly deform — a phenomenon called 살금살금 기다. High-temp flanges must resist it.

🔗 Oxidation and Scaling Resistance

At high temperatures, some metals oxidize rapidly. Flange materials should form protective oxide layers or resist scaling.

🔧 Compatibility with High-Temp Gaskets

Flange design must support gasket materials that don’t break down under heat.

---

Best Materials for High-Temperature Flanges

The choice of flange material directly affects performance in hot conditions. Below are the most trusted alloys for high-temperature systems:

1. Chrome-Moly Steel (ASTM A182 F11, F22, F91)

• Designed for power plants and high-pressure steam lines

• Withstands temperatures up to 600–650°C

• 강한, weldable, and widely used in refineries

2. Austenitic Stainless Steels (304시간, 316시간, 321시간)

• High carbon versions of standard stainless grades

• Excellent creep resistance and oxidation protection

• Ideal for heat exchangers, 보일러, and reformers

3. Inconel Alloys (625, 600, 800H/HT)

• Exceptional high-temperature strength and corrosion resistance

• Can perform up to 1100°C

• Used in nuclear, 항공우주, and extreme chemical processing

4. 하스텔로이

• Suitable for high-temperature and highly corrosive environments

• Superior resistance to oxidizers and acids at elevated temperatures

5. Duplex Stainless Steels (2507, S31803)

• Better high-temperature strength than 316L

• Limited to 300–350°C applications

• Useful in heat-affected zones in corrosive systems

SASA FLANGE offers all the above grades with certification and dimensional accuracy for critical operations.

---

Recommended Flange Types for High-Temperature Service

1. 용접 넥 플랜지

• The top choice for high-heat applications

• 긴 테이퍼형 허브는 응력 집중을 감소시킵니다.

• Seamlessly connects to pipes, ensuring strength and thermal continuity

2. 블라인드 플랜지

• Used to seal off high-temperature pressure vessels and piping

• Requires heat-resistant bolting and gaskets

3. RTJ (링형 조인트) 플랜지

• Metallic sealing system ensures leak-free performance under heat and pressure

• Used in severe service pipelines and steam systems

4. Long Weld Neck (LWN) 플랜지

• Extended neck for better heat dissipation

• Ideal for reactors, 개혁가, and boiler headers

메모: Avoid slip-on or threaded flanges in critical high-temperature applications. Their reduced weld area or mechanical joints may weaken under thermal stress.

---

Gasket and Bolt Selection for High-Temp Flange Systems

Gaskets:

• Spiral Wound Gaskets with Graphite Fillers: Most common for high temperatures

• Metal Jacketed Gaskets: For higher temperature and pressure

• Kammprofile Gaskets: Best for thermal cycling environments

볼트:

• Use alloy steel bolting like ASTM A193 B16 또는 A320 L7

• Preload torque must be recalculated considering heat-induced relaxation

Gasket failure is a common source of leaks in high-temp systems. Choose compatible materials that resist embrittlement and maintain compression under heat.

---

Design Tips for High-Temperature Flange Installations

🌡️ Consider Thermal Expansion

Mismatch in expansion rates between pipe and flange can cause stress and failure. Always pair flange material with compatible piping.

🔩 Use Proper Torqueing

Heat can loosen bolts over time. Use high-temp lubricant and verified torque values at installation.

🔁 Plan for Thermal Cycling

If the system starts and stops frequently, use flanges and gaskets that can handle fatigue and expansion-contraction cycles.

🧪 Include Testing and Documentation

Request heat treatment records, PMI 테스트, and creep rupture test results for assurance.

---

Common Applications of High-Temperature Flanges

High-temp flanges are widely used across industries such as:

• 기름 & Gas Refineries
  – Furnace headers, heater coils, 개혁가

• 발전
  – Superheated steam lines, turbine inlet/outlet

• 석유화학
  – Hot gas systems, reactor loops

• Aerospace and Defense
  – Jet engine exhaust lines, high-temp fuel systems

• Industrial Boilers and Furnaces
  – High-pressure steam connections

Wherever there’s extreme heat, there must be a high-performance flange — and that’s where SASA FLANGE comes in.

---

왜 선택해야 할까요? SASA FLANGE for High-Temperature Applications?

~에 SASA FLANGE, we specialize in precision-machined, heat-resistant flanges for demanding thermal environments. Our product offerings include:

• 용접 목, 눈이 먼, RTJ, and long weld neck flanges

• 재료: A182 F11/F22/F91, 인코넬, Stainless 321H, 하스텔로이

• Pressure ratings from Class 150 에게 2500

• NDE inspection, 열처리 기록, EN 10204 3.1/3.2 인증

We support oil & 가스, 힘, 화학적인, and process industries globally — with a commitment to performance and quality.

---

결론

In high-temperature environments, flange failure can mean system shutdown, safety hazards, and massive losses. The right flange for high temperature must be engineered with superior metallurgy, secure design, and reliable sealing.

에서 chrome-moly steel for steam systems to 인코넬 for ultra-high temperatures, the key is material compatibility, flange type selection, and proper installation.

If you need flanges that can take the heat — and keep your system running under pressure — choose SASA FLANGE, your trusted supplier of performance-grade, heat-resistant flange solutions.