When it comes to potable water systems, selecting the correct flange material is more than just an engineering decision — it’s a public health priority. The materials used in water pipelines, 피팅, and flanges must meet stringent safety standards to prevent contamination, leaching, and corrosion, all while maintaining mechanical strength and longevity.

그래서, what flange material is best for potable water? This comprehensive guide will walk you through the ideal options, international standards, and key considerations when choosing flanges for drinking water distribution, treatment, and storage systems.

~에 SASA FLANGE, we provide flange solutions that are fully compliant with health and safety codes — trusted by water utilities, infrastructure contractors, and public service engineers worldwide.

---

Why Flange Material Matters in Potable Water Systems

플랜지는 파이프를 연결하는 데 사용됩니다., 밸브, and equipment across all segments of a potable water system — from treatment plants to underground distribution mains. The material used in these flanges must meet specific requirements:

✅ Non-toxic and non-leaching

Materials must not release harmful substances such as lead, 니켈, or cadmium into the water.

✅ Corrosion-resistant

Flanges should withstand constant water exposure and resist rust, 구멍 뚫기, and scaling.

✅ Durable and pressure-rated

The material must maintain mechanical strength for decades under varying pressure conditions.

✅ Certifiable to drinking water standards

Acceptable materials must comply with international potable water certifications such as:

• NSF/ANSI 61 (미국)

• WRAS (UK)

• DVGW (독일)

• AS/NZS 4020 (호주)

• GB/T 17219 (중국)

---

Approved Flange Materials for Potable Water

Let’s explore the most commonly approved and recommended flange materials for potable water piping systems:

---

1. 스테인레스 스틸 (304엘 / 316엘)

개요:
Stainless steel flanges are widely used for potable water due to their 우수한 내식성, non-leaching properties, 그리고 long service life. Grades like 304엘 그리고 316엘 are low in carbon and suitable for both cold and hot water systems.

장점:

• Long-term durability

• Hygienic and easy to clean

• NSF 61 and WRAS certified (depending on source)

응용:

• Drinking water pipelines

• Pump stations

• Water treatment tanks and skids

---

2. 연성이 있는 철 (Epoxy-Coated)

개요:
Ductile iron offers high strength and cost efficiency but must be coated internally and externally to prevent corrosion. Flanges made from ductile iron are typically lined with fusion-bonded epoxy (FBE) 또는 epoxy paint that complies with drinking water standards.

장점:

• High mechanical strength

• Cost-effective for large diameters

• Approved under many national standards when coated

응용:

• Municipal pipelines

• Large valve connections

• Fire protection and water mains

---

3. Brass / Bronze (Lead-Free Alloys)

개요:
In smaller diameter systems, lead-free brass or bronze flanges are sometimes used, especially in residential or building plumbing. They must be certified to lead-free requirements, especially in the U.S. under the Safe Drinking Water Act.

장점:

• Corrosion-resistant in neutral pH water

• Good machinability

• Suitable for fittings and small-bore piping

응용:

• Domestic plumbing

• Meter connections

• Indoor water distribution

---

4. PVC / CPVC (Plastic Flanges)

개요:
In non-metallic piping systems, especially in residential, 관개, or light industrial potable water applications, plastic flanges made from PVC or CPVC may be used. These materials must also be tested and approved under drinking water safety standards.

장점:

• Corrosion-proof

• Lightweight and easy to install

• Low cost

응용:

• Water tanks

• Low-pressure systems

• Temporary piping lines

---

5. HDG Carbon Steel (Not Preferred)

개요:
Hot-dip galvanized (HDG) 탄소강 flanges are sometimes used in non-corrosive, low-purity water systems, but they are generally not recommended for critical potable water use due to the potential for zinc leaching, scaling, 그리고 coating degradation over time.

Use only with proper approvals and in short-term, low-pressure, or transitional settings.

---

Flange Type Recommendations for Potable Water Systems

Regardless of the material, the following flange types are common in potable water systems:

• 슬립온 플랜지: Economical and easy to align, suitable for general water lines

• 용접 넥 플랜지: For high-pressure or large-diameter lines requiring strength and leak-proof performance

• 블라인드 플랜지: Used to close off pipe ends or create access points

• 스레드 플랜지: Typically used in smaller pipelines or with plastic piping

• 랩 조인트 플랜지: Ideal when frequent dismantling is required, such as in filters or tanks

SASA FLANGE manufactures all of these types in stainless steel and ductile iron for potable water service, with optional certifications and coatings to meet national and international safety standards.

---

Gasket and Bolt Considerations

Flange performance in potable water systems also depends on compatible sealing and fastening components:

Gaskets:

• EPDM (Ethylene Propylene Diene Monomer) gaskets are widely approved for potable water use.

• Avoid gaskets containing asbestos or industrial-grade rubbers.

볼트:

• 사용 stainless steel bolts 또는 zinc-coated bolts approved for potable water environments.

• Ensure the entire flange assembly is corrosion-resistant and non-leaching.

---

Certifications to Look For

When selecting flange materials for drinking water applications, always verify the following certifications:

• NSF/ANSI 61 (미국)

• WRAS (UK)

• ACS (France)

• DVGW W270 (독일)

• AS/NZS 4020 (호주)

• GB/T 17219 (중국)

SASA FLANGE provides stainless steel and epoxy-coated ductile iron flanges tested and certified according to customer region and project requirements.

---

Typical Applications for Potable Water Flanges

• Municipal water supply lines

• Underground water distribution mains

• Water treatment facilities

• Booster pump stations

• RO and UF membrane skids

• Building water systems

• Irrigation and agricultural supply

---

왜 선택해야 할까요? SASA FLANGE for Potable Water Projects?

SASA FLANGE is a leading manufacturer of high-quality flanges for waterworks and infrastructure projects worldwide. With a full range of materials and sizes, we offer:

• Stainless steel 304L / 316L flanges with potable water approval

• Ductile iron flanges with NSF-certified epoxy coatings

• Custom fabrication and pressure classes from PN10 to PN40 and Class 150 에게 600

• Third-party inspection and 3.1 / 3.2 인증

• Fast global delivery and full export documentation

Whether you’re building a new water treatment plant or repairing a distribution line, SASA FLANGE provides safe, 테스트를 거쳤습니다, and reliable flange solutions — trusted in potable water systems around the world.

---

결론

그래서, what flange material is best for potable water? The answer depends on your application, 압력, and regulatory requirements — but in general:

• 스테인레스 스틸 (304L/316L) is the gold standard for safety, 내구성, and hygiene.

• Epoxy-coated ductile iron is ideal for large municipal and infrastructure pipelines.

• Plastic or brass flanges are suited for low-pressure and indoor applications, provided they are lead-free and certified.

No matter the material, ensure your flanges are certified for drinking water use and installed with compatible gaskets and bolts.

선택하다 SASA FLANGE for flange materials you can trust — safe for people, strong for infrastructure.