Description
Traceable alloy butt-weld fitting
ASTM B366 Inconel 625 Custom Unequal Tee
A procurement-ready custom unequal butt-weld tee in ASTM B366/B366M, UNS N06625 nickel-chromium-molybdenum-niobium alloy, supplied for corrosive chemical, offshore, marine and high-integrity process service with project-defined dimensions, wall, construction and inspection.
What is a Inconel 625 custom unequal tee?
A custom unequal tee is used when standard reducing-tee combinations do not match the required run, outlet, branch or center-to-end dimensions. Each end wall, transition and branch reinforcement must be reviewed against the approved design.
Inconel 625 is the widely searched trade-name description for UNS N06625. Its nickel-chromium-molybdenum-niobium composition is considered for chloride-bearing, marine and corrosive process environments, but the specific medium and temperature must be reviewed.
Technical specification
| Product type | Custom unequal butt-weld tee |
|---|---|
| Material | ASTM B366/B366M, UNS N06625 nickel-chromium-molybdenum-niobium alloy |
| Material family | Nickel-chromium-molybdenum alloy |
| Dimensional basis | Approved project drawing; applicable B16.9 requirements by agreement |
| Configuration | Custom run/outlet/branch diameters and center-to-end dimensions per approved drawing |
| Nominal size | Run × outlet × branch dimensions reviewed individually for manufacturability |
| Wall thickness | Standard schedules, heavy wall and project-specific wall subject to manufacturing review |
| Construction | Formed or fabricated construction subject to material specification, code and approved drawing |
| End preparation | Butt-weld bevel matched to connecting pipe wall and approved welding detail |
| Heat treatment | Solution treatment and final condition as required by ASTM B366 and the ordered class |
| Documentation | EN 10204 3.1 MTC, heat traceability, PMI, dimensions and additional NDE as ordered |
Available size and wall combinations depend on alloy, forming route, construction and quantity. Confirm the exact pipe outside diameter and wall in the RFQ.
Standards and technical references
Dimensional standard
The approved project drawing controls non-standard unequal-tee geometry. ASME B16.9 applies only to requirements and configurations explicitly included in the order and within its scope.
Material specification
ASTM B366/B366M covers factory-made wrought nickel and nickel-alloy pressure-piping fittings.
Why select Inconel 625?
UNS N06625 is considered for seawater, offshore topsides, chemical processing, pollution-control systems and other corrosive duties where the approved material class calls for Alloy 625.
| Selection point | Inconel 625 | Incoloy 825 |
|---|---|---|
| Alloy family | Ni-Cr-Mo-Nb | Ni-Fe-Cr-Mo-Cu-Ti |
| Strength | Generally higher | Moderate, service-dependent |
| Typical focus | Seawater, chloride and severe mixed environments | Acid and reducing/oxidizing process environments |
| Selection | Verify corrosion data for exact conditions | Verify corrosion data for exact conditions |
Typical applications
| Industry | Typical fitting duty | Why this material is considered |
|---|---|---|
| Offshore and marine | Special three-diameter branch connection in process piping | Seawater and chloride-bearing systems |
| Chemical processing | Large-bore header transition with a non-standard branch | Mixed corrosive process streams |
| Environmental systems | Replacement fitting matched to existing plant dimensions | Scrubbers and pollution-control piping |
Application examples are selection context, not a design approval. Confirm process chemistry, pressure, temperature, weld procedure and governing code.
Manufacturing, inspection and documentation
Custom unequal-tee manufacture starts with drawing approval and requires verification of every end diameter, wall, center-to-end dimension, transition, branch profile and bevel. N06625 orders commonly specify PMI, solution-treatment records, surface examination and construction-class/NDE requirements.
Heat-number traceability and PMI when specified.
All three end ODs/walls, center-to-end dimensions, transitions and bevels checked to drawing.
PT, MT where applicable, UT, RT or third-party witnessing to the ordered scope.
MTC, heat-treatment and inspection records compiled to project requirements.
RFQ checklist
- Complete material grade and UNS where applicable
- ASME B16.9 edition or approved project drawing
- Run, outlet and branch sizes
- Schedule or exact wall thickness at every end
- Seamless or welded construction/class
- Bevel detail and matching pipe dimensions
- Quantity, destination and required delivery date
- EN 10204 3.1, PMI, dimensional and NDE requirements
Frequently asked questions
What is a Inconel 625 custom unequal tee?
It is a Custom unequal butt-weld tee manufactured from ASTM B366/B366M, UNS N06625 nickel-chromium-molybdenum-niobium alloy. It is supplied to an approved drawing when the run ends, branch size or center-to-end dimensions fall outside the standard reducing-tee combination. The ordered material specification controls chemistry, mechanical properties, heat treatment and testing.
Which standard applies to this fitting?
The approved project drawing controls non-standard unequal-tee geometry. ASME B16.9 applies only to requirements and configurations explicitly included in the order and within its scope. The material basis is ASTM B366/B366M, UNS N06625 nickel-chromium-molybdenum-niobium alloy. The purchase order must state the required edition, construction, size, wall and supplementary examinations.
Where is Inconel 625 typically selected?
UNS N06625 is considered for seawater, offshore topsides, chemical processing, pollution-control systems and other corrosive duties where the approved material class calls for Alloy 625. Material suitability still depends on fluid chemistry, pressure, temperature, fabrication, corrosion allowance and the governing piping code.
Can heavy-wall and welded construction be supplied?
Yes, subject to manufacturing review. Provide the exact outside diameter, wall thickness or schedule, construction class, end preparation, quantity and NDE requirements so feasibility can be confirmed.
What should an RFQ include?
State the complete material grade, dimensional standard or approved drawing, run and branch sizes, schedule or exact wall, seamless or welded construction, bevel detail, quantity, destination, certification and inspection scope.
Product image is representative. Surface appearance varies by alloy, manufacturing route and finish.
Request a technical quotation
Send the material, size combination, wall, quantity, drawing or standard, and inspection requirements for review.
