• Blog
  • Haberler
  • F91 Dövme Flanşların PMI ve Ultrasonik Testleri Tamamlandı
Dövme boru bileşeninin ultrasonik testi
Ultrasonik Test
3 Ağustos 2026

F91 Dövme Flanşların PMI ve Ultrasonik Testleri Tamamlandı

Proje HaberleriPublished: 3 Ağustos 2026SASA FLANGE Project Team
Project completed

Positive material identification and ultrasonic testing were completed for an ASTM A182 F91 forged flange package. The inspection plan used PMI to verify alloy identity and UT to examine internal quality, supported by hardness, dimensional and traceability reviews.

Project snapshot

Project status PMI and UT completed
Malzeme ASTM A182 F91 forged alloy steel
Flange type Weld neck and blind, RF/RTJ as ordered
Standart ASME B16.5
Pressure class Class 600–1500
Size range NPS 4–18
Denetleme PMI, UT, sertlik, dimensions and traceability
Application High-temperature power and process piping

Delivery highlights

PMI and UT were reported separately because they verify different acceptance characteristics.
Test identification remained linked to flange marking and heat number.
Hardness and heat-treatment records complemented the chemistry and NDE results.

PMI verification for F91 material identity

PMI readings were taken at prepared locations under the approved procedure and compared with the project acceptance criteria. Instrument identification, calibration checks, operator, item and heat number were recorded. Where light elements or carbon are decisive, the method and its limitations must be considered rather than relying on a generic alloy library result.

PMI does not verify microstructure, tensile properties or heat treatment. Those characteristics require separate records and tests.

Ultrasonic examination and final review

UT was performed from suitable scanning surfaces to examine the forging for reportable internal reflectors within the specified coverage. Surface condition, calibration blocks, sensitivity, scan plan and acceptance standard were controlled by the examination procedure.

The final review combined UT reports with hardness, boyutlar, ısıl işlem, markings and material certificates. This evidence package supported release of the finished F91 flanges without treating any single test as a complete quality verdict.

Information needed for a comparable RFQ

A comparable inquiry should identify the exact material specification and grade, governing standard and edition, NPS'ler, basınç sınıfı, flanş tipi, karşı karşıya, bore or matching pipe schedule, quantity and destination. For this project-news scope, the key reference points were ASTM A182 F91 forged alloy steel, Weld neck and blind, RF/RTJ as ordered, Class 600–1500 Ve NPS 4–18.

State the required EN 10204 certificate type, ısı numarası izlenebilirliği, PMI extent, sertlik sınırları, boyutlu rapor, NDE method and acceptance standard, third-party witness points, packing method and required delivery date at quotation stage. Early definition allows manufacturing, inspection and document schedules to be reviewed together.

Üretme, inspection and packing photos

Images show the relevant SASA FLANGE production, quality-control and shipment stages used for this project-news report.

Finished forged flange prepared for NDE
Machined component identified for project inspection.
Inspector completing dimensional verification
Inspection records linked to the marked component.
Inspected flanges protected for transport
Released items packed after quality approval.
Alaşımlı Çelik Flanşlar İçin PMI Testi Neden Önemlidir? Dövme Alaşımlı Çelik Flanşlar için NDT Muayene Yöntemleri F11 için Sertlik Testi Gereksinimleri, F22 ve F91 Flanşları

Sık sorulan sorular

What is the difference between PMI and UT?

PMI checks alloy chemistry at the test location. UT uses sound waves to examine internal material quality.

Can UT identify the alloy grade?

HAYIR. UT is not a chemical identification method; grade identity comes from traceability, certificates and appropriate PMI or laboratory testing.

Why is hardness reviewed for F91?

Hardness provides supporting evidence about material and thermal condition, especially when reviewed with heat-treatment and mechanical-property records.

Request a quotation for alloy steel flanges

Send the ASTM grade, standard and edition, NPS'ler, basınç sınıfı, flanş tipi, karşı karşıya, bore or pipe schedule, miktar, delivery destination and required PMI, ÖYD, sertlik, third-party inspection and documentation.

Send Your RFQView Flange Products

İlgili Mesajlar

EvÜrünler
Aramak