플랜지는 배관 시스템의 중요한 구성 요소입니다., connecting pipes, 밸브, and equipment while ensuring safe and efficient operation under pressure. While many flange types exist—such as weld neck, 슬립온, 눈이 먼, and socket weld—some are designed for very specific functions. One such specialized flange is the 오리피스 플랜지.

Orifice flanges are not only connectors but also measurement devices, enabling operators to monitor fluid flow in a pipeline. This makes them especially valuable in industries such as oil and gas, 화학 처리, 수처리, 그리고 발전.

This article explains what an orifice flange is, 어떻게 작동하나요?, its design features, 애플리케이션, and why industries depend on it for accurate flow measurement.

---

오리피스 플랜지란??

안 오리피스 플랜지 is a type of flange assembly that incorporates an orifice plate for measuring the flow rate of liquids, 가스, or steam in a pipeline. Unlike standard flanges, orifice flanges include radial, tapped holes drilled into the flange ring. These allow differential pressure to be measured across the orifice plate, enabling calculation of flow.

간단히 말해서, orifice flanges act as both a structural connection and an instrument for flow monitoring.

---

Components of an Orifice Flange Assembly

An orifice flange assembly typically consists of:

• 오리피스 플랜지: A pair of flanges with pressure tap holes.

• Orifice Plate: A thin plate with a precise hole in the center.

• Bolts and Gaskets: To secure the assembly and ensure leak-proof operation.

• Jack Screws: Facilitate separation of flanges during plate replacement or inspection.

---

Working Principle of an Orifice Flange

1. Fluid flows through the pipeline and reaches the orifice plate.

2. The orifice plate introduces a restriction, creating a pressure drop across the plate.

3. Pressure taps in the flange measure the differential pressure before and after the orifice plate.

4. Flow rate is calculated based on this pressure difference using Bernoulli’s principle.

This method is widely used due to its simplicity, 신뢰할 수 있음, and accuracy.

---

표준 및 사양

Orifice flanges are manufactured according to international standards to ensure compatibility and accuracy:

• ASME B16.36: Standard for orifice flanges.

• ASME B16.5: Covers dimensions for flanges up to 24 신장.

• 압력 등급: Typically available from Class 300 수업에 2500.

• 크기: Commonly manufactured from ½ inch to 24 inches or larger, depending on pipeline design.

---

Materials Used in Orifice Flanges

Orifice flanges are produced in a variety of materials depending on operating conditions:

• 탄소강 (A105, A350 LF2): Economical choice for general service.

• 스테인레스 스틸 (304, 316, 321, 347): 우수한 내식성.

• 합금강 (F11, F22): High strength for elevated temperature applications.

• 듀플렉스 스테인레스 스틸: Excellent resistance to stress corrosion cracking in chloride-rich environments.

• 니켈 합금 (인코넬, 하스텔로이, 모넬): Exceptional resistance to aggressive chemicals.

---

Advantages of Orifice Flanges

• Accurate Flow Measurement: Simple and effective method for monitoring flow rates.

• Dual Functionality: Acts as both a flange and a measuring device.

• Standardized Design: Complies with ASME standards for easy integration.

• 비용 효율적: More affordable than advanced flow meters while providing reliable results.

• 다재: Suitable for liquids, 가스, 그리고 증기.

---

Applications of Orifice Flanges

Orifice flanges are widely used in industries where flow monitoring is critical:

석유 및 가스

Used to measure crude oil, 천연가스, and refined product flow in pipelines and processing plants.

Chemical and Petrochemical

Enables accurate flow measurement of corrosive chemicals in refineries and chemical plants.

발전

Monitors steam flow in boilers, turbines, and cooling water circuits.

Water Treatment and Distribution

Measures water flow in treatment facilities, pumping stations, and distribution networks.

해양 및 해양

Used in shipboard systems and offshore platforms to track fuel and cooling flows.

---

Types of Orifice Plates Used in Orifice Flanges

Different orifice plate designs can be fitted into the flange assembly:

• Concentric Orifice Plate: 가장 일반적인, with a central bore for general flow measurement.

• Eccentric Orifice Plate: Bore offset from the center, used for measuring dirty or slurry fluids.

• Segmental Orifice Plate: Semi-circular bore, suitable for gas or liquid with suspended solids.

• Quadrant Edge Orifice Plate: Rounded bore edge, ideal for viscous fluids.

---

Installation and Maintenance

• 설치: Orifice flanges are installed in pairs, with the orifice plate clamped between them. Pressure taps are aligned for differential pressure measurement.

• Maintenance: Plates can be removed and replaced using jack screws without dismantling the entire system. Regular inspection ensures accuracy.

---

Difference Between Orifice Flanges and Standard Flanges

• Standard Flanges: Serve only as mechanical connectors.

• 오리피스 플랜지: Connect pipes and measure flow simultaneously.

This unique functionality makes orifice flanges indispensable in flow-critical systems.

---

Case Study Example

A power plant needed to monitor steam flow through its high-pressure boilers. Traditional flow meters were too costly. By installing orifice flanges with concentric plates, the plant achieved reliable flow measurement, simplified maintenance, and reduced equipment costs, all while meeting ASME standards.

---

Future Trends in Orifice Flanges

• Integration with Digital Monitoring: Coupled with smart sensors for real-time data collection.

• Advanced Materials: Increased use of duplex and nickel alloys for extreme environments.

• Customized Designs: Tailored flange and plate assemblies for specific flow and pressure conditions.

---

Why Choose sasaflange for Orifice Flanges

When sourcing critical flange components, reliability and precision are essential. SASAFLANGE supplies high-quality orifice flanges manufactured to ASME B16.36 and B16.5 standards. With options in carbon steel, 스테인레스 스틸, 합금강, 및 니켈 합금, SASAFLANGE ensures accurate flow measurement and long-lasting performance across industries.

---

결론

An orifice flange is a specialized flange assembly used to measure flow rates in pipelines by introducing an orifice plate and capturing differential pressure readings. It combines the strength of a flange connection with the functionality of a flow measurement device, making it highly valuable in industries such as oil and gas, 화학 처리, 발전, 및 수처리.

With standardized design, 다재, 그리고 비용 효율성, orifice flanges remain one of the most widely used solutions for monitoring fluid flow. By selecting the right materials and working with trusted suppliers, industries can ensure reliable performance and long-term efficiency in critical operations.