Alaşımlı Çelik Flanşlar için İhracat Ambalajı

Proje HaberleriYayınlandı: 3 Ağustos 2026SASA FLANGE Proje Ekibi

Proje tamamlandı

Export packaging was completed for alloy steel flanges covering F11, F22 and F91 grades, multiple flange types and pressure classes. The packing route combined dry surfaces, temporary rust prevention, rigid face covers, moisture control, separation and seaworthy crate bracing.

Proje anlık görüntüsü

Proje durumu	Export packing completed
Malzeme	ASTM A182 F11, F22 and F91
Flanş tipi	WN, SO, BL, SW and THD
Standart	ASME B16.5 Ve ASME B16.47
Basınç sınıfı	Sınıf 150–2500
Boyut aralığı	NPS1/2–24; large-diameter NPS 26–60 when ordered
Denetleme	Final visual, boyutlar, işaretleme, quantity and packing verification
Başvuru	Refinery, güç, petrochemical and oil and gas projects

Teslimatın öne çıkanları

Machined faces and RTJ grooves received rigid, non-abrasive protection.

VCI or barrier materials and desiccant were selected for the shipping route.

Blocking and bracing prevented heavy flanges from contacting each other.

Rust prevention before the crate is closed

Low-alloy steel can develop atmospheric rust when moisture, salt or condensation reaches bare machined surfaces. After final inspection, the flanges were cleaned and dried before an approved temporary rust preventive was applied to permitted areas. Gasket faces, RTJ grooves and weld ends received compatible protection that can be removed without damaging the surface.

Barrier wrap, VCI materials and desiccant were used according to the packing specification and expected transit conditions. Wet components were never sealed inside moisture-resistant wrapping.

Seaworthy protection for handling and ocean transport

Rigid covers protected raised faces and ring grooves. Individual flanges were separated, blocked and braced so their mass could not shift into adjacent components during truck, port or vessel handling. Crate members, lifting provisions and package markings were selected for the gross weight and destination requirements.

Before closure, quantities, markings and heat-number groupings were reconciled with the packing list. Receiving instructions identify the need for dry storage, periodic package inspection and preservation renewal when installation is delayed.

Karşılaştırılabilir bir RFQ için gerekli bilgiler

Karşılaştırılabilir bir araştırma, malzeme spesifikasyonunu ve derecesini tam olarak tanımlamalıdır., geçerli standart ve baskı, NPS'ler, basınç sınıfı, flanş tipi, karşı karşıya, delik veya eşleşen boru programı, miktar ve hedef. Bu proje haber kapsamı için, temel referans noktaları şunlardı: ASTM A182 F11, F22 and F91, WN, SO, BL, SW and THD, Sınıf 150–2500 Ve NPS1/2–24; large-diameter NPS 26–60 when ordered.

Gerekli olanı belirtin EN 10204 sertifika türü, ısı numarası izlenebilirliği, PMI boyutu, sertlik sınırları, boyutlu rapor, NDE yöntemi ve kabul standardı, üçüncü taraf tanık noktaları, Teklif aşamasında paketleme yöntemi ve gerekli teslimat tarihi. Erken tanımlama üretime olanak sağlar, birlikte gözden geçirilecek denetim ve belge programları.

Üretme, inspection and packing photos

Images show the relevant SASA FLANGE production, quality-control and shipment stages used for this project-news report.

Industrial components secured in export packaging — Wrapped and separated components ready for transport.

Finished components staged in the warehouse — Dry indoor staging before packing closure.

Machined alloy flange surfaces before protection — Finished flanges inspected before preservation.

Sık sorulan sorular

Should alloy steel flange faces be painted?

Permanent paint should not be applied to sealing faces or RTJ grooves unless an approved removable system specifically allows it.

Is VCI alone enough for ocean shipment?

No single product is sufficient by itself. Dryness, barrier integrity, kurutucu, duration, climate and crate design must be considered together.

What should be checked when the shipment arrives?

Check crate condition, moisture ingress, item count, markings, preservation and the condition of sealing faces and weld ends before storage.

Alaşımlı çelik flanşlar için teklif isteyin

ASTM notunu gönder, standart ve sürüm, NPS'ler, basınç sınıfı, flanş tipi, karşı karşıya, delik veya boru programı, miktar, Teslimat hedefi ve gerekli PMI, ÖYD, sertlik, üçüncü taraf denetimi ve dokümantasyonu.

Teklif Talebinizi Gönderin Flanş Ürünlerini Görüntüle